FSCUT1000S medium power laser cutting control system
Product Description
FSCUT1000S medium power laser cutting control system
The FSCUT1000S system is a low-cost fiber laser cutting solution tailored on the FSCUT2000C medium power laser cutting system. The system combines a motion control card and a capacitor height controller into one, and is a special laser cutting system with extremely high cost performance.
Specification
Adaptation software
CypOne laser cutting software
control card
BMC1603
Interface Type
32-bit PCI bus, 132MB/s
Terminal board
BCL4562
Power requirements
24V DC/2A
Motor control signal
X/Y1/Y2 axis pulse output, the highest frequency is 3MHz
Z axis analog output, -10~+10V
X, Y1, Z axis with encoder input interface, the highest sampling frequency is 10MHz
Dedicated output
2-way DA: 0~10V, 50mA
1 PWM: 5V/24V optional, precision 5KHz (0.1%)
Dedicated input
6-way limit: X/Y1/Z 3-axis positive and negative limit
Universal input
6 channels: low-level effective, support normally open, normally closed
Universal output port
8 channels: relay output, 30V DC/5A
working environment
Temperature: 0~55℃
Humidity 5%~95% (no condensation)
Performance characteristics
Craft
Supports up to two levels of perforation
Only support the communication of domestic lasers such as Ruike, Chuangxin, Fibo, etc.
Support flight cutting, leapfrog
Capacitor edge finding is not supported; the use of the expansion board can support electric focus, double exchange workbench; support simple layout
Does not support advanced processes such as cooling points, sharp corner ring cutting, and release corners
control
Track accuracy 0.05mm, positioning accuracy 0.01mm
Maximum cutting speed 100m/min, maximum moving speed 100m/min
Maximum acceleration 1G
Does not support dual-drive error alarm and pitch compensation functions
The origin signal is not supported, only the limit signal is sampled when returning to the origin
Application industry
It is suitable for low-power fiber laser cutting machines within 1500W, and is widely used in the laser processing equipment required for thin metals such as the advertising industry.
BMC1603
control card
WKB
Wireless handheld box
BCL4562
Terminal board
BCL-AMP
Preamplifier
Accessories
C62-2/5/10
62 core wire
C15-1.5/2.5/4
Servo line
SPC-140/SPC-180/140B/180B
RF line
LAN-3X/LAN-0.3X/1X/7X/17X
cable